Properties and specifications | |
Chemical Name | Hydroxyethyl cellulose |
Appearance | White or off-white powder |
Moisture content | ≤6 % |
Ash content | ≤5 % |
Molar substitution degree | 1.8-2.2 |
pH value | 6-8 |
Particle size | 99% pass 80 mesh |
Viscosity | 85,000-110,000 mPa.s (NDJ-1, 2% solution, 20℃) |
3,500-6,500 mPa.s (Brookfield-RV, 2% solution, 20℃) |
Applications
• Interior wall paints
• Exterior wall paints
Typical Properties
√ Improve thickening efficiency
√ Good compatibility with inorganic substances
√ Good protective colloid activity
√ Improve stability and anti-spattering
Packaging, storage and safety instructions
This Landercoll HEC is supplied in 25kgs multilayer paper bags with polyethylene intermediate layer and/or in big bags. One 20’FCL can load 10MT with pallet, 12MT without pallet, and one 40’FCL can load 20MT with pallet, 22MT without pallet.When kept in clean, dry conditions in its original packing, Landercoll can be stored for a long time. During storage a slow loss of viscosity can be measured. Landercoll absorbs water from moist air. Once opened, container must be resealed and kept tightly closed. Like all fine particle organic substances, cellulose ethers constitute a dust explosion hazard. Dust formation and deposits must be kept to a minimum so that no ignitable dust/air mixtures can form. Ignition sources such as naked flames, hot surfaces, sparks and static electricity should be avoided.