Hydroxypropyl Methyl Cellulose (HPMC)

LANDERCOLL K150
Properties and specifications
Chemical Name Hydroxy propyl methyl cellulose
Appearance  White or off-white powder
Delayed Solubility No
Moisture content  ≤6 %
Ash content      ≤5 %
Methoxy content   19-24 %
Hydroxypropyl content   4-12 %
pH value  6-8
Particle size    99% pass 80 mesh
Viscosity  140,000-160,000 mPa.s (NDJ-1, 2% solution, 20℃)
55,000-65,000 mPa.s   (Brookfield-RV, 2% solution, 20℃)

Applications

• Tile adhesive

• EIFS

Typical Properties

√ Enhanced bonding strength

√ Increased open time

√ Improved water retention

√ Improved sag resistance

√ Improved workability

Packaging, storage and  safety instructions  
This Landercoll HPMC is supplied in 25kgs multilayer paper bags with polyethylene intermediate layer and/or in big  bags. One 20’FCL can load 10MT with pallet, 12MT without pallet, and one 40’FCL can load 20MT with pallet, 22MT without pallet.When kept in clean, dry conditions in its original  packing, Landercoll can be stored for a long time. During  storage a slow loss of viscosity can be measured. Landercoll absorbs water from moist air. Once opened,  container must be resealed and kept tightly closed. Like all fine particle organic substances, cellulose ethers constitute a dust explosion hazard.Dust  formation and deposits must be kept to a minimum so  that no ignitable dust/air mixtures can form. Ignition  sources such as naked flames, hot surfaces, sparks  and static electricity should be avoided.

  • CONTACT US
    • +86 531 6995 9221
    • info@landu-china.com
    • 19,Lishan north road,Jinan,Shandong,China
Copyright © LANDU SiteMap HtmlMap